Bulk configuration enables you to set up or modify the following settings for multiple load test scenarios simultaneously:

  • Test Load Type
  • Load Injector Payload
  • Geo Zone Distribution
  • Network Proxy Settings

Please note that LoadView does not validate test scenarios configured in bulk. Validation is performed only during the individual test scenario setup and prior to each test run.

How to Apply Bulk Changes to Test Scenarios

  1. In your LoadView account, navigate to the Test Scenarios page.
  2. On the Test Scenarios page, select the scenarios you wish to configure from the list.
  3. Select the Bulk Configuration tool from the toolbar.
  4. From the Bulk Configuration menu, select the specific setting you want to change for the selected scenarios.
  5. Adjust the chosen setting and save your changes. The configuration will be applied to all selected scenarios.